fireside garage door solutions logo

Call 253-472-4995

Builder Collection

CONSTRUCTION: Door frames are constructed using 1-1/8″ thick finger-jointed West Coast kiln dried Hem/Fir stile and rails, Tongue & Groove weather joint at meeting rails and a 1-1/8″ Polystyrene core. 1/4″ Luan Mahogany Plywood is laminated and stapled to both sides of the frame. A 5/8″ thick wood overlay is applied to the door face to create the door design. All windows are a grid style; if the design includes arched windows, the window grid is arched. Door faces are Paint Grade or Stainable as specified by buyer. Choose from either 5/8″ thick Meranti Mahogany or Western Red Cedar overlay material applied over Luan Plywood. All doors must be prepared for finish, prime painting is an available option.


  • Frame thickness: 1-1/8″, Face material thickness: 1/4″, Overlay thickness: 5/8″
  • Overall door thickness: 2-1/4″
  • End Stiles: 2-1/2″, Center Stiles: 2-1/2″
  • Bottom Rail: 5″, Top Rail: 5″, Meeting Rail width combined: 5″
  • Arch: Standard radius for all arched door designs are 15′-0″ radius. Single car doors; 8′ to 10′ wide door have one arch. Double car doors; 15′-6″ to 18′ have two 15′-0″ radius arches (double arches). Arched designs are not available on the 12′ wide doors.
  • Calculated insulation rating through section, R Value=6.18
  • Doors are unfinished and require light sanding and preparation before applying door finish.
  • 1 Year Limited Warranty
  • Wood Door Finishing Instructions

AVAILABLE WIDTHS: 8′-0″, 9′-0″, 10′-0″, 12′-0″, 15-6″, 15′-8″, 16′-0″, 18′-0″
AVAILABLE HEIGHTS: 6′-6″, 6′-9″, 7′-0″, 7′-6″, 7′-9″, 8′-0″, 8′-6″, 9′-0″

For ease of operation do not exceed 28″ Section Height


  • Paintable or Stainable door face
  • Prime Painting
  • Decorative hardware
  • 25,000, 50,000 & 100,000 cycle torsion springs
  • 1/8″ clear annealed glass standard, clear obscure is optional
  • Angle mounted standard lift track
  • Low clearance, high lift or vertical lift track and hardware

HARDWARE: The Builder Collection is equipped with heavy duty 15″ radius torsion hardware; bracket mounted 2″ track is 2″. 10 ball bearing rollers with nylon races, non corrosive door fixtures and graduated 14 Ga. double end hinges are standard. Single car doors include one 2-1/4″ strut per door; double care doors include one 2-1/4″ strut per section.