Therma Classic

CONSTRUCTION: The Therma Classic is made from hot dipped galvanized wood grain textured steel skins that are embossed with raised panel designs then sandwiched with a polystyrene core. This type of construction forms a thermal barrier between front and back of door. 20 Ga. steel backer plates are toggle locked to the inside of the back skin prior to assembly. Exterior skins are secured to a polystyrene core with Urethane adhesive, a method of construction that is unparalleled in strength. Therma Classic doors are available in 2 design series. The S Series doors have multiple vertical panels embossed to form the various designs. The R Series doors start with 40″ x 24″ embossed recessed panels. Then roll formed pre painted wood grain textured aluminum design elements are mechanically attached as well as bonded to the face of the recessed panels to form a multitude of designs.

NOMINAL SPECIFICATIONS:

• Section Joint: Tongue and Groove joint between sections with thermal break
• Thickness: 2″
• R Value = 9 (Calculated door section R Value in accordance with DASMA-163)
• Finish: Baked on polyester enamel
• Colors selection: White
• Bottom weather seal: U-shape loop type vinyl with aluminum retainer
• Limited Lifetime Warranty

STANDARD WIDTHS:	8′-0″	9′-0″	10′-0″	16′-0″	18′-0″	20′-0″
PANELS WIDE:	2	2	2	4	4	4
ODD WIDTHS:	7′-6″ to 10′-11″ = 2 panels 11′-0″ to 14′-11″ = 3 panels 15’0″ to 20’0″ = 4 panels
STANDARD HEIGHTS:	7′-0″	8′-0″	9′-0″	10′-0″	12′-0″	14′-0″
	Sections available in 27″, 28″, 31″ and 32″ in height

OPTIONS:

• Widths up to 20′ in one inch increments, heights up to 14′
• 1/8″ clear annealed glass standard, clear obscure and insulated glass optional.
• Decorative hardware
• 25,000, 50,000 & 100,000 cycle torsion springs
• Low clearance, high lift and vertical lift track and hardware

HARDWARE: 15″ or 20″ radius torsion hardware; track is 2″ bracket mounted. Quiet long life nylon rollers, non-corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door to keep the door rigid.

AVAILABLE COLORS:

* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.

AVAILABLE GLASS:

• 5/32″ Rain
• 5/32″ Solar Cool Bronze
• 1/4″ Barique Wire
• 1/4″ Clear
• 1/4″ Mirropane
• 1/4″ Misco Wire
• 1/4″ Plexiglass
• 1/4″ Polycarbonate
• 1/8″ Bronze
• 1/8″ Clear
• 1/8″ Gluechip
• 1/8″ Gray
• 1/8″ Greylite #31
• 1/8″ Mistlite
• 1/8″ P516 Obscure
• 1/8″ Acrylic
• 1/8″ Polycarbonate
• 1/8″ Satin Etch
• 1/8″ Seedy
• 1/2″ Insulated Clear
• 7/32″ White Diffused Laminate